Institut für Werkstoffwissenschaft und Werkstofftechnologie
> Zum Inhalt

Bücher und Originalarbeiten von Institutsautoren

Untenstehend ist eine Liste von Büchern, die von WWWT-Autoren verfasst oder herausgegeben wurden. Eine Zusammenstellung weiterer wissenschaftlicher Literatur, die am Institut entstanden ist (Zeitschriftenartikel, Tagungsbeiträge, Patente, Dissertationen, ...) , können Sie durch Auswahl des entsprechenden Untermenüs auf der linken Seite vornehmen. Sie werden dabei automatisch zur Publikationsdatenbank der TU Wien weitergeleitet.

Seidler, Sabine, Grellmann, Wolfgang, Arndt, K.-F., Lechner, M. D. (Eds.)

Part 3: Mechanical and Thermomechanical Properties of Polymers

Subvolume A: Polymer Solids and Polymer Melts

Series: Landolt-Börnstein: Numerical Data and Functional Relationships in Science and Technology - New Series

ISBN 978-3-642-55165-9

The volume provides a compilation of quantitative parameters concerning thermomechanical, mechanical and fracture-mechanical properties of pure, filled and reinforced thermoplastics, thermosets and high-performance composites

The rapid and dynamic progresses in research and development of new plastic material systems are reviewed and the assessed data and concepts compiled from a systematic point of view and presented in a structured way

The sub volumes A of volume VIII/6 form a series of data collections and handbooks covering properties of polymer solids and polymer melts. The present volume forms the third part of it and compiles concepts and data concerning thermomechanical, mechanical and fracture-mechanical properties of pure, filled and reinforced thermoplastics, thermo sets and high-performance composites.

E. Kozeschnik

Modeling Solid-State Precipitation

2013, Momentum Press 

ISBN-10:1606500627

ISBN-13: 978-1606500620

Over recent decades, modeling an simulation of solid-state precipitation has attracted increased attention in academia and industry due to their important contributions in designing properties of advanced structural materials and in increasing productivity and decreasing costs for expensive alloying. In particular, precipitation of second phases is an important means for controlling the mechanical-technological properties of structural materials. However, profound physical modeling of precipitation is not a trivial task.

This book introduces you to the classical methods of precipitation modeling and to recently-developed advanced, computationally-efficient techniques

  • nucleation theory, precipitation growth, calculation of interfacial enegies
  • advanced techniques for technologically relevant multi-component systems and complex thermo-mechanical treatments
  • numerical approaches using evolution equations and discrete particle size distributions
  • the major software products available for precipitation kinetics simulations

H.P. Degischer, S. Lüftl

Leichtbau - Prinzipien, Werkstoffauswahl und Fertigungsvarianten

2009, Wiley-VCH

ISBN: 978-3-527-32372-2

Leichtbau ist ein umfassendes Konstruktionsprinzip, welches das Ziel verfolgt, das Gewicht bzw. die Masse von technischen Produkten zu reduzieren. Angewandt auf bewegte Maschinenelemente, Transportmittel und Sportgeräte sind die Motive dafür, zum Beispiel höhere Beschleunigungen zu erzielen, die Nutzlast zu erhöhen und die aufzuwendende Energie zu reduzieren. Das Einsatzspektrum des Leichtbaus reicht vom allgemeinen Maschinenbau (z.B. Roboter, Verpackungsmaschinen, Sportartikel etc.),  Energieerzeugungsanlagen (z. B. Windräder) über den Fahrzeug- und Flugzeugbau bis hin zur Gestaltung von Raumfahrzeugen und Raumstationen.

Die Umsetzung des Leichtbaus bedarf einer gesamtheitlichen Betrachtung der verschiedenen technischen Möglichkeiten, so ist beispielsweise die Substitution von Werkstoffen ohne Anpassung des Designs im Allgemeinen nicht effizient. Das vorliegende Buch entstand im Anschluss an das Projekt "Austrian Light Weight Structures" und will StudentInnen der Technik, MitarbeiterInnen in Forschung und Entwicklung, DesignerInnen, Entwicklungs- und FertigungsingenieurInnen, technischen VerkäuferInnen, EntscheidungsträgerInnen für Innovationen und allen, die an der Umsetzung von Leichtbaukonzepten interessiert sind, wissensbasierte Leichtbaulösungen vermitteln und sie zu deren kreativer Umsetzung anregen.

W. Grellmann, S. Seidler

Polymer Testing

2008, Hanser, ISBN: 3-446-40900-9

The staggering growth rates in plastics production and applications increase the demand for meaningful measuring and analysis methods in polymer testing. The advances in electronic measuring techniques led to further developments in classic testing methods as well as to completely new methods. This book describes the significance of characteristic data for the quantification of the interrelationship between microstructure and macroscopic properties.
Additional information about damage processes and deformation mechanisms can be gained with the help of coupled non-destructive polymer testing methods and hybrid methods of polymer diagnostics, respectively. Numerous examples for the optimization of polymers and their composites and the assessment of component properties provide a material science focused insight into modern polymer testing.

A.R. Pyzalla, A. Borbely, H.P. Degischer

Stress evaluation in materials using neutron and synchrotron radiation

Trans Tech Publications Ltd., 2008

ISBN: 978-0-87849-393-7

 

Topics covered by the book are

     

  • Developments of measurement methods and instrumentation
  • Material processing and residual stresses
  • Influence of residual stresses on physiscal and mechanical properties of materials and components
  • Measurement and assessment of residual microstresses and intergranular stresses
  • Residual strains and stresses in complex materials, e.g. multiphase materials and biomaterials
  • Residual stresses in thin films and microcomponents
  • Industrial applications of residual stress analyses using synchrotron radiation and neutrons
  •  

Koenraad G.F. Janssens, Dierk Raabe, Ernst Kozeschnik, Mark A. Miodownik, Britta Nestler

Computational Materials Engineering - An Introduction to Microstructure Evolution

2007, Elsevier, ISBN 978-0-12-369468-3.   

Computational Materials Engineering is an advanced introduction to the computer-aided modeling of essential material properties and behavior, including the physical, thermal and chemical parameters, as well as the mathematical tools used to perform simulations. Its emphasis will be on crystalline materials, which includes all metals. The basis of Computational Materials Engineering allows scientists and engineers to create virtual simulations of material behavior and properties, to better understand how a particular material works and performs and then use that knowledge to design improvements for particular material applications. The text displays knowledge of software designers, materials scientists and engineers, and those involved in materials applications like mechanical engineers, civil engineers, electrical engineers, and chemical engineers. Readers from students to practicing engineers to materials research scientists will find in this book a single source of the major elements that make up contemporary computer modeling of materials characteristics and behavior. The reader will gain an understanding of the underlying statistical and analytical tools that are the basis for modeling complex material interactions, including an understanding of computational thermodynamics and molecular kinetics; as well as various modeling systems. Finally, the book will offer the reader a variety of algorithms to use in solving typical modeling problems so that the theory presented herein can be put to real-world use.

H. Cerjak, H.K.D.H. Bhadeshia, E. Kozeschnik (eds.)

Mathematical Modelling of Weld Phenomena 8

2007, Verlag der Technischen Universität Graz, ISBN 978-3-902465-69-6.

This present book ´Mathematical Modelling of Weld Phenomena 8´ contains papers presented at the 8th International Seminar ´Numerical Analysis of Weldability´, which was held from Sept. 25 to 27 2006 at Schloss Seggau near Graz, Austria. This meeting was organised by the Institute for Materials Science, Welding and Forming of Graz University of Technology together with the working group ´Mathematical Modelling of Weld Phenomena´of Commission IX of the International Institute of Welding (IIW).
The academic aim of these meetings is to publish authoritative, well-written, refereed and edited articles, which are presented in sufficient depht to enable the ready reproduction of the work and to serve as reference as well as teaching material.

H. Cerjak, H.K.D.H. Bhadeshia, E. Kozeschnik (eds.)

Mathematical Modelling of Weld Phenomena 7

2005, Verlag der Technischen Universität Graz, ISBN 3-901351-99-X.

This volume contains papers presented at the seventh International Seminar on ´Numerical Analysis of Weldability´, which was held in autumn 2003 at its usual location in Schloss Seggau near Graz, Austria. This meeting was organised by the Institute of Material Science, Welding and Forming of the Graz University of Technology and the working group ´Mathematical Modelling of Weld Phenomena´of  Commission IX of the International Institute of Welding (IIW).
The academic aim of thes meetings is to publish authoritative, well-written, refereed and edited articles, which are presented in sufficient depht to enable the ready reproduction of the work and to serve as teaching material.

W. Grellmann, S. Seidler

Kunststoffprüfung - Verfahren – Kenngröße – Anwendung

2005, Hanser Verlag, ISBN: 3-446-22086-0

 

In der Kunststoffprüfung werden aussagekräftige Mess- und Auswertemethoden benötigt - dies umso mehr, als in der Kunststofferzeugung und -anwendung enorme Zuwachsraten verzeichnet werden. Die klassischen Prüfverfahren haben sich weiterentwickelt und es wurden völlig neuartige Methoden etabliert. Dieses Buch beschreibt die Zusammenhänge zwischen der Mikrostruktur und den makroskopischen Eigenschaften. Zusätzlich werden Verfahren vorgestellt, mit denen vertiefte Informationen über Schädigungsprozesse und -mechanismen ableitbar sind. Ein besonderes Kennzeichen dieses Buches ist die Verdeutlichung der Aussagekraft von Werkstoffkenngrößen zur Optimierung von Kunststoffen und Verbunden und zur Beurteilung von Bauteileigenschaften.

 

W. Grellmann, S. Seidler

Deformation and Fracture Behaviour of Polymers

(Springer Engineering Materials 2001)

H.P. Degischer, B. Kriszt

Handbook of cellular metals

Wiley-VCH, Weinheim, 2002, ISBN: 3-527-30339-1

H.P. Degischer

Verbundwerkstoffe

Wiley-VCH, Weinheim, 2003, ISBN: 3-527-30762-1

14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wiley-VCH